Traqmate.com Support Forum

THIS IS FOR TRAQMATE BASIC ONLY.

DO NOT DOWNLOAD THIS FILE TO A TRAQMATE THAT HAS A DISPLAY UNIT!
IT WILL STOP TALKING TO THE DISPLAY

Traqmate Basic 3.00

Click these this link to download the two firmware files for DU and SU. You may need to right-click and Save As.
http://www.traqmate.com/downloads/tmrelease300/ssu.tqc

Features
Support for TraqData HD and Sony HD Camcorders
Faster GPS Startup
Data Recovery if Power Lost

Traqmate Basic 2.15

Click on the link below to download. You may need to right-click Save As.
http://www.traqmate.com/downloads/tmrelease215/ssu.tqc

This fixes issues with the AutoStart / AutoStop features added in V2.10.

Issues Resolved
Traqmate Basic did not working correctly with the TraqSync cable when using AutoStart.
Unit could stop recording even when AutoStop was disabled.

These problems do not exist in Traqmate Complete (Traqmate with Display Unit) so there is no planned release of a Traqmate Complete 2.15 at this time.

Traqmate Basic 2.10

Click on the link below to download. You may need to right-click Save As.
http://www.traqmate.com/downloads/tmrelease210/ssu.tqc

Features

Better Dropout Handling
Unit fills in some dropouts automatically for better performance.
Less glitches in the data.

AutoStart
Start recording at given speed
Set it and forget it. Never miss another session.
Stop recording after given time not moving
Works with ChaseCam 4-wire interface for automatic video recording.

Button Control
Disable Record Button option, Disable Off button option
For vehicle performance auditing or other applications. Special hidden option intended for driving schools, rent and drive groups, and sanctioning bodies.

Support for ChaseCam 4-wire interface
PDR auto turn-on
More robust - replaces delicate TraqCam cable
PDR auto turn-off
Turns unit on and off to eliminate confusion and improper synching
PDR start/stop record
No tool hookup - thumb-screw DB-15 connection, Posi-lock tach connection, and built-in RJ-45 cable for ChaseCam digital interface.

40Hz Improvements
Improved 40Hz accuracy in conjunction with Traqview updates
40Hz mode now more usable and accurate.

Traqmate Basic 1.30

NOTE: ANALOG SCALING CHANGED. RECALIBRATE TRAQDATA SENSORS AFTER INSTALLING THIS FIRMWARE.

http://www.traqmate.com/downloads/tmrelease130/ssu.tqc

Features:
ChaseCam synchronous control - turns camera record on when GPS lock obtained
Digital Outputs - shift light and analog input alarms
Improved Analog Input Accuracy
Various other small improvments


Traqmate Basic 1.25.
This version fixes bugs with recognition of TraqData and TraqTach and data synchronization.
http://www.traqmate.com/downloads/tmrelease125/ssu.tqc


Traqmate Basic 1.22.
This version supports the TraqData and TraqTach.
http://www.traqmate.com/downloads/tmrelease122/ssu.tqc

No feature changes.
More accurate alignment of GPS and accelerometers
Better dropout protection when used with Traqview 1.22

Traqmate Basic 1.08
Improved data collection and GPS reception.
http://www.traqmate.com/downloads/tmrelease108/ssu.tqc

Traqmate Basic 1.01
http://www.traqmate.com/downloads/tmrelease101/ssu.tqc

Allright - I downloaded the Traqmate Basic Firmware to my Traqmate Complete system and now the two aren't compatible. There must be a fix to this - please reply with the steps Need t o get this resolved quick - track day is approaching. Help!

You can do a factory reset to defaults with both units plugged in using the Display Unit. Sorry for the holiday delay.
Thanks
Team Traqmate
Andre' Surles

Andre,
When the Display Unit and Sensor Unit are connected to my computer via the usb cord the screen of the display unit reads "power lost" - what steps will allow me to get to the factory default option?

Make sure you are using the USB cable that came with the Traqmate. Some cables from digital cameras do not fit all the way into the Display Unit.

Does the unit work if you are plugged into SU power?

If you are using the right cable, it is possible that your DU has a bad USB connector. If that is the case, it will need to be sent back for repair. Instructions are on the website under Service.